Showtec Galactic RGB850
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1,2 Watts traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation.
The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specs
- Power Input: AC 100-240V, 50/60Hz
- Power Consumption: 68 Watt
- Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
- Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
- Laser Modulation: TTL
- Laser Class: 4
- Scan Speed: 20K
- Scan Angle: +/-60˚
- Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
- Control Display: LCD
- DMX Channels: 13
- Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
- Safety Features: Key switch, Interlock, Safety eye
- Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
- Dimensions: 335x240x165 mm
- Weight: 11,5 kg
- Accessories: 2 Keys, Interlock test connector, Flightcase, ILDA cable, 2G SD card
- Dimensions flightcase: 760x435x315mm