JBL AWC129
The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.
Features
- Highly weather-resistant IP56 rating
- Consistent 90°x90° broadband pattern control
- Components: 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil, 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm
- Extraordinary clarity for speech, with extended frequency response for music
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange
- 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability
- High-power passive crossover network
- Overload protection
- 55 Hz - 20 kHz frequency response
- 200 Watt 70V/100V multi-tap (built-in transformer)
- Direct 8Ω low-impedance
Specs
- Frequency Range: 55 Hz - 20 kHz
- Coverage Pattern: 90°x90°
- Directivity Factor (Q): 10,1
- Directivity Index (DI): 9,5 dB
- Long-Term System Power Rating (IEC): 400 W (1600 W peak) - 2 hrs, 250 W (1000 W peak) - 100 hrs
- Sensitivity: 96 dB
- Maximum SPL Direct 8Ω: 122 dB (peaks of 128 dB), 200 W Tap: 119 dB
- Crossover Network: 1,5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
- Nominal Impedance: 8 Ohms
- Transformer Taps: 70V - 200W, 100W, 50W, 25W, 100V - 200W, 100W, 50W
- LF Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil
- HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling
- HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection
- Enclosure: ABS with Glass enclosure, heavily braced
- Attachment: Two M10 (fine-thread) points for included U-bracket, M6 secondary safety attachment point on back panel
- Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing
- Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2,5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4,0 mm (0,16") and 9,0 mm (0,36")
- Dimensions: 40x40x44 cm
- Weight: 15,9 kg