Acoustic system (satellite) JBL Control 23T WH

Description

JBL Control 23T WH

The Control 23T can be used in either 70,7V or 100V distributed-line sound systems. The single power tap is 5W at 70,7V and 10W at 100V. The unique InvisiBall mounting hardware is included in each system and makes short work of permanent installation. In addition to rapid installation, the InvisiBall mounting method adds the benefit of vertical rotation of up to 37 and horizontal rotation of up to 44. Because InvisiBall adjustments are made through a hidden access behind the logo badge, the grill never needs to be removed and there exists a high degree of theft deterence.

The Control 23T readily accepts a variety of paints and finishes to match any decor. Weather resistance is maximized by coating the woofer cone in polypropylene and terminating its circumference in JBL's WeatherEdge, a seamless, rubberized extension of the woofer surround that provides added protection to critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance against sun, salt and moisture. Zinc plated grilles resist rusting. Included Accessories - Invisiball Assembly, 4 mm x 80 mm hex key.

Features

Isolation transformer for 70,7V/100V distributed-line sound systems
Components: 3-1/2" Polypropylene coated woofer, 1/2" Titanium coated horn loaded tweeter
Built-in InvisiBall mounting hardware
Weather resistant enclosure and transducers
Readily paintable to match decor
90x90 high frequency horn
Overload Protection Circuitry

Specs

Frequency Range: 100 Hz - 21 kHz
Power: 50 Watts
Transformer: 5W/70V, 10W/100V (IEC pink noise, 100 hrs.)
Nominal Coverage: 90x90
Directivity Factor (Q): 4,8
Directivity Index (DI): 6,8
Nominal Impedance: 8 Ohms
Crossover Frequency: 3,5 kHz
LF Driver: 88 mm (3,5") Polypropylene cone w/WeatherEdge
HF Driver: 13 mm (0,5") Titanium coated polycarbonate
Enclosure Material: HIPS (High Impact Polystyrene)
Overload Protection: Full-Range power limiting to protect network and transducers
Termination: Spring terminals, accepts banana plug
Safety Agency Rating: Transformer UL1876 recognized
Dimensions: 11x14x19 cm
Weight: 1,8 kg

Code: JBL-Control23TWH

3 879 ₴

Installment

194 ₴ / months.

In installments
We offer you to purchase the goods
by making our interest-free installment.
That is, You do not overpay for a commodity a dime!
Make it easy: after choosing goods in the store,
You pay the first installment and take out
the purchased item, and within the next 6 months
pay the remaining amount.

The terms of the installment purchase in the online store
Musician.ua:

• the recommended down payment is 60-70%;
• for regular customers with a positive history
of payments, possible contribution from 30%;
• you will pay the balance in equal installments.
Within the next 6 months from
the time of purchase

Узнать условия

The first installment 2715.3 ₴

6 payments 194 ₴

The sum of all payments 3879 ₴

Overpayment 0 ₴

JBL Control 23T WH

Features

Isolation transformer for 70,7V/100V distributed-line sound systems
Components: 3-1/2" Polypropylene coated woofer, 1/2" Titanium coated horn loaded tweeter
Built-in InvisiBall mounting hardware
Weather resistant enclosure and transducers
Readily paintable to match decor
90x90 high frequency horn
Overload Protection Circuitry

Specs

Frequency Range: 100 Hz - 21 kHz
Power: 50 Watts
Transformer: 5W/70V, 10W/100V (IEC pink noise, 100 hrs.)
Nominal Coverage: 90x90
Directivity Factor (Q): 4,8
Directivity Index (DI): 6,8
Nominal Impedance: 8 Ohms
Crossover Frequency: 3,5 kHz
LF Driver: 88 mm (3,5") Polypropylene cone w/WeatherEdge
HF Driver: 13 mm (0,5") Titanium coated polycarbonate
Enclosure Material: HIPS (High Impact Polystyrene)
Overload Protection: Full-Range power limiting to protect network and transducers
Termination: Spring terminals, accepts banana plug
Safety Agency Rating: Transformer UL1876 recognized
Dimensions: 11x14x19 cm
Weight: 1,8 kg