Powered Cabinet Mixer with Effects Alto Professional RMX1008DFX

Alto Professional RMX1008DFX

The RMX1008DFX includes everything you need to tackle virtually any live performance. It all starts with an ultra-clean 1000 watts of Class D power to drive your speakers of choice. Class D amplification makes the RMX1008DFX not only powerful but incredibly light compared to other solutions so you won't break your back bringing it to the venue. Running the RMX1008DFX in stereo will deliver a continuous 2 x 500W at 4-ohms of pure, clean power.

We didn't stop at just delivering clean power for this powerhouse cabinet mixer. The RMX1008DFX also features an incredibly useful array of tools that can make your events world-class. RMX1008DFX  includes 18 total inputs including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX1008DFX .

Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger  combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

Specifications:

• Mono input channels
  • Microphone input: Electronically balanced, discrete input configuration
  • Frequency response: 10Hz to 55kHz, +/–3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
  • Gain: 50dB (MIC)
  • SNR: (Signal to Noise Ratio) >90dB
• Line input
  • Electronically balanced
  • Frequency response: 10Hz to 55kHz, +/–3dB
  • Distortion: (THD & N) 0.04% at +4dBu, 1kHz
  • Gain: 30dB
• Stereo input channels
  • Line input: Unbalanced
  • Frequency response: 10Hz to 55kHz, +/–3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
• Impedances
  • Microphone input: 1.4kOhm
  • Channel Insert return: 2.5kOhm
  • All other inputs: 10kOhm or greater
  • Tape out: 1kOhm
  • All other output: 120Ohm
• Equalization
  • Hi shelving: +/–15dB @12kH
  • Mid bell: +/–15dB @2.5kHz
  • Low shelving: +/–15dB @ 80Hz
• Alesis DSP Section
  • A/D and D/A converters: 24-bit
  • DSP resolution: 24-bit
• Type of effects
  • Hall, Room, Vocal & Plate Reverb
  • Mono & Stereo DELAY (max delay time 650ms)
  • Chorus, Flanger & Reverb Modulations
  • Reverb+Delay, Reverb+Chorus,
  • Reverb+Flanger combinations
• Presets: 256
• Controls
  • 16-position PRESET Selector; 16-position VARIATION selector
  • CLIP LED; MUTE SWITCH with LED indicator
• Main Mix Section
  • Noise: (Bus Noise) Fader 0 dB, channels muted:–85dBr (ref.:+4dBu)
  • Fader: 0dB, all input channels assigned and set to
  • UNITY gain:–71dBr (ref.:+4dBu)
  • Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
  • AUX Sends max out: +22dBu
• Output Power Stereo mode
  • 440W(RMS) @ 4ohm
  • 480W(EIAJ) @ 4ohm
  • 254W(RMS) @ 8ohm
  • 263W(EIAJ) @ 8ohm
  • Bridge mode 945W @ 8ohm
  • Power supply Main voltage 100-120VAC ~ 60Hz
  • 220-240VAC ~ 50Hz
  • Fuse 100~120V: T8A 250V
  • 220~240V:T5A 250V
• Dimensions (WxLxH): 550mm x 220mm x 210mm
• Weight: 17.63 lb