MINIMOOG VOYAGER
Minimoog Voyager Rack Mount Edition has all the features of the synthesizer Minimoog Voyager Performer Edition, except the keyboard and touchpad. mode switch is also added to the audio output (unbalanced -2 dB, or +4 dB balanced), and control inputs and outputs (CV / Gate) performed on the two connectors DB25. In addition, using the front panel backlit with blue inscriptions (there is brightness control), both models Minimoog Voyager Anniversary Edition or Electric Blue Edition.
The module can be installed in a rack, where it will occupy a height of 5 units or use a desktop - in this case it is recommended to purchase wooden side handles.
Specifications:
- Monophonic analog synthesizer stage
- 3 analog oscillator per voice plus noise generator:
Waveform:
- Triangular
- Sawtooth
- Square
- Pulse with variable width (PWM)
- The waveform gradually replaced by another one
- For all generators varies independently setting the octave for the second and third generator can also adjust +/- 7 semitones relative to the first
- Possible rigid synchronization of generators, frequency modulation
- Classic filter Moog 24dB / oct with the ability to self-excitation
- Ability to work in parallel mode (2-pass filter) or in sequential mode (LF + HF) to provide a bandpass filter
- 2 envelope generators type ADSR, one generator for the filter and amplifier
- analog amplifier
- Wheels pitch (+/- 5 tones) and modulation (0 to 100%)
- Low-frequency generator
Waveform:
- Triangular
- Square
- Wave-type sample & hold
- Smooth sample & hold
- 2 modulation matrix 6x6
- 7 banks of 128 presets
- As additional sources of modulation depth control:
- modulation wheel
- Velocity
- envelope Generators
Switching:
- The connectors on the rear panel AUDIO OUT RIGHT AND LEFT (MONO):
- The switch allows you to select -2 dBm unbalanced floating outputs or +4 dBm, 600 ohm balanced outputs
- MIXER EXT IN: Any power tool, a linear or audio combined with the oscillator and noise generator to the filter
- MIX OUT / FILTER AUDIO IN: Connector TRS, which can be used to insert effect between the output of the mixer and the input of the filter with standard cable
- ACCESSORY PORTS:
Inputs (standard connectors DB25 male):
- Control Voltages:
- Volume
- PAN
- Low-cut filter
- Wave generator
- Generator PITCH
- Mod2 (External Power MOD)
- Mod1 (Control Pedal / MOD BUS module depth effect)
- Input Sample and Hold
- ENVELOPES RATE
- LFO RATE
- T.S. X
- T.S. In
- T.S. A
- GATE:
- LFO SYNC
- ENVELOPES GATE
- SAMPLE AND HOLD GATE
- RELEASE
- T.S. GATE
Outputs (standard connectors DB25 female, VX-351 CV Expander can be connected to this port to output these signals on its sockets 1/4 "):
- Keyboard GATE
- CV Keyboard
- Keyboard pressure CV
- Keyboard velocity CV
- X, Y, Z and CV outputs based T.S. inputs
- MOD 1 and MOD2
- MOD and PITCH wheel
- MOD BUS Outputs
- The filter and volume ENVELOPES
- LFO triangular and square waveforms
- Out stepped and smoothed Sample and Hold
- Noise
- MIDI IN, THRU, OUT
- Connector supply: 100-240 V universal power supply allows you to connect Minimoog Voyager anywhere in the world without adapters
Mixing module:
- 5-channel mixer, mixing audio sources for further processing filters
- External Mixer knob (to the right of the display) has a dual function, which allows you to quickly change the presets
- The left knob adjusts the level of the corresponding channel
- The right of the corresponding channel switches off completely
- 5 inputs for combining an external sound source to the filtration
- 5 controls for adjusting the relative levels of the oscillator, noise, and external audio input
- 5 input switches to quickly switch individual audio signals
- External level indicator allows the player to set the correct external audio signal level
- EXTERNAL Channel refers to an external sound source
Module oscilators:
- 3 stable wideband VCO (Voltage Controlled Oscillators) with a variable waveform
- 2 Frequency controller: change the oscillator frequency number 2 and number 3 with respect to the oscillator number 1 in the range + / -7 semitones
- 3 octave selector select [OCTAVE]: total range - 6 octaves
- WAVE 3 selector smoothly adjust the waveform of each of the oscillators in the order:
- Triangular
- Sawtooth
- Rectangular (wide)
- Rectangular (narrow)
- Switch 1-2 SYNC: synchronization of the generator waveform number 2 with the frequency of the oscillator number 1 for sharp timbre effects
- 3-1 FM switch provides linear frequency modulation generator number 1 from the generator number 3
- 3 KB CONT switch disconnects the generator number 3 from control by the keyboard, which allows it to work independently on the same frequency
- 3 FREQ switch lowers the frequency of the generator number 3 to subsonic range, allowing it to operate as a low frequency audio or oscillator modulations
Filter Module:
- Dual Lowpass and Highpass-Lowpass mode includes dual filters high and low frequencies
- Dual mode Lowpass parallelnyhNCh consists of two resonant filters, Moog, one per output channel
- Highpass-Lowpass mode consists of Moog filters: low frequency pass filter is connected in series with the high-frequency pass filter
- CUTOFF: control cut certain frequencies of both filters throughout the audio range (adjusted baseline frequency of both filters cutoff)
- SPACING controller establishes the difference in frequency between the filters in a range of + / - 3 octaves
- RESONANCE knob sets the level of resonance of both filters from zero (pure response) to the self-excitation peak
- KB CONT AMOUNT control sets the level of the keyboard tracking, that is, the dependence of the cutoff frequency of the height of the pressed key
- Switch Dual Lowpass / Highpass-Lowpass allows you to choose between the dual filter LF or LF-posledovatelnymiVCh filters
- Eating directly from AC 100-250
- Keyboard Dimensions: 483 × 184 × 222 mm
- Weight: 6.8 kg