- Traditionally warm and transparent overdrive
- Single tone control makes tone-shaping simple
- Adds sustain and gain without coloring your guitar or amp’s tone
Power: The MXR GT-OD is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ECB003E, or a DC Brick™ power supply.
Controls:
- TONE knob shapes color of distorted signal
- OUTPUT knob controls overall volume of effect
- GAIN knob controls amount of overdrive
- FOOTSWITCH toggles effect on/ bypass (indicated by red LED)
Directions:
- Run a cable from your guitar to the GT-OD’s INPUT jack and run another cable from the GT-OD’s OUTPUT jack to your amplifier.
- Start with the OUTPUT, TONE and GAIN controls at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate the OUTPUT knob clockwise to increase the overall volume of the effect or counterclockwise to decrease it.
- Rotate the TONE knob clockwise for a brighter sound and counterclockwise for a darker sound.
- Rotate the GAIN knob clockwise to increase the amount of distortion and counterclockwise to decrease it.
Specifications:
- Input Impedance: 1 MΩ
- Output Impedance: 88 dB
- Current Draw: 2.2 mA
- Bypass: Hardwire
- Power Supply: 9 volts DC
* A-weighted, all controls at mid position