Power amplifier Lab.Gruppen FP 10000Q/SP

Lab.Gruppen FP 10000Q/BP

The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q. The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. NB. operation of NomadLink requires the NLB 60E NomadLink Bridge & Network Controller which must be purchased separately.

Specs

Model: FP 10000Q

General:

• Number of amplifier channels 4
• Peak total output all channels driven 10000 W
• Peak output voltage per channel 150 V
• Max output current per channel 50 A peak

Max output power (all channels driven):

• 2 ohms 2500 W
• 4 ohms 2100 W
• 8 ohms 1300 W
• 16 ohms 660 W

Max output power bridged:

• 2 ohms Not recommended 1
• 4 ohms 5000 W
• 8 ohms 4200 W
• 16 ohms 2600 W

Performance:

• THD 20 Hz - 20 kHz at 1 W <0.1%
• THD at 1 kHz and 1 dB below clipping <0.05%
• Signal to Noise Ratio >112 dBA
• Channel separation (Crosstalk) at 1 kHz >70 dB
• Frequency response (1 W into 8 ohms) + 0 / -3 dB 6.8 Hz - 34 kHz
• Output impedance @ 100 Hz 32 mOhm

Gain, Sensitivity and Limiters:

• VPL, selectable per ch 150, 121, 101, 83, 70, 56, 47, 38 V
• VPL, when bridged 2 300, 242, 202, 166, 140, 112, 94, 76 V
• Voltage Peak Limiter mode (per ch.) Hard / Soft
• Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
• Default gain 35 dB
• Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to

Connectors and Buttons:

• Output connectors (per ch.) Neutrik speakON
• Input connectors (per ch.) 3-pin XLR, electronically balanced
• Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
• NomadLink network On board, 2 x RJ45 connectors IN and OUT
• Intelligent fans (on/off) Yes, depending on presence of output signal
• Power on/off and Remote enable on/off Individual switches on front-panel
• Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed

Front-panel user interface:

• Common NomadLink Network; Power Average Limiter (PAL)4; Power on
• Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power:

• Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
• Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
• Power Average Limiter (PAL) 4 Yes
• Soft-start / Inrush Current Draw Yes / max. 5 A
• Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

Dimensions: 483x88x396 mm

Weight: 12 kg