Power Amplifier QSC Cinema DCA-1644

Product code: 280620

Manufacturer:
QSC
For physical goods, free delivery is available to your address using the Nova Poshta service for orders over 1000 UAH.

QSC Cinema DCA-1644

Amplifiers series DCA have a number of proprietary developments under the general name "A QSC cinema exclusive". Among them: active limitation of the starting current. The highlight of QSC Cinema DCA-1644 is PowerLight technology providing dynamic saturation of low frequencies. The rear panel houses the DataPort interface for integration with QSC digital video processors. The DCA-1644 has LED indicators for monitoring the status and operating mode of the amplifier.

Specs

  • Number of channels: 4
  • Power at 8 Ohm, 20 Hz – 20 kHz, 0,05% THD: 250 W
  • Power at 4 Ohm, 20 Hz – 20 kHz, 0,1% THD: 400 W
  • Power at 4 Ohm, EIA: 1 kHz, 1% THD @: 450 W
  • Bridged Mono Mode
    • 16 Ohm, 20 Hz - 20 kHz, 0,1% of the SOI: 500 W
    • 8 Ohm, 20 Hz - 20 kHz, 0,1% of the SOI: 800 W
  • Signal to Noise 20 Hz – 20 kHz, unweighted: -105 dB
  • Input Sensitivity full rated power @ 8 ohms: 1,12 V rms 
  • Input Sensitivity full rated power @ 4 ohms: 1,0 V rms 
  • Output Circuitry Class Type: AB+B
  • Distortion (Typical)
    • 20 Hz – 20 kHz: 10 dB below rated power: Less than 0,02% THD @ 8 and 4 ohms
    • 1 кHz and below: full rated power: Less than 0,02% THD @ 8 and 4 ohms
  • Frequency Response
    • LF filter switched on: 20 Hz – 20 кHz, ± 0,2 dB
    • LF filter switched off: 8 Hz – 50 кHz, +0/-3 dB
  • Damping Factor 1 kHz and below: Greater than 500
  • Input Impedance: 10 kOhm unbalanced and 20 kOhm balanced
  • Input Clipping: 10 V rms (+22 dBu)
  • Cooling: Variable-speed fan, rear-to-front air flow
  • Connectors, each channel
    • Input: 3-pin detachable terminal blocks
    • Output: Safety-shrouded barrier strip, including monitor output
    • DataPort: One HD15 per pair of channels
  • Voltage Gain at 8 ohms: 40х (32 dB)
  • Controls
    • Front: AC switch, Ch. 1,2,3 and 4 recessed gain knobs
    • Rear: DIP switch (Clip Limiter on/off, each channel; LF Filter on/off, each channel; LF Filter Freq select 30 or 50 Hz, each channel; Inputs Parallel or Stereo; Bridge Mode)
  • Indicators
    • Clip/Prot: Red LED
    • Level -10 dB: Green LED
    • Level -20 dB: Green LED
    • Signal -35 dB: Green LED
    • Bridged: Yellow LED
    • Parallel Inputs: Yellow LED
    • Power: Green LED
  • Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.
  • Load Protection: On/off muting, DC-fault power supply shutdown
  • Dimensions: 483х89х356 mm
  • Weight: 9,5 kg

User Manual

There are no reviews for this product.

Write a review

Please login or register to review

There are no references for this product.

Similar products

The XM Series multichannel amplifiers are ideal for use in theater and conference room audio systems. The series includes 80W x 4 and 180W x 4 models that meet the requirements of most audio systems. XM amplifiers' compact size and surprisingly light weight make them easy to install. Switching p..
The GS series is a touring series of professional high-power amplifiers that completely covers the needs for sound reinforcement equipment used for dubbing various events in large concert halls, stadiums and large open areas. The TD class circuitry used in the GS series amplifiers almost uncompromis..
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. The four models in t..
The GS series is a touring series of professional high-power amplifiers that completely covers the needs for sound reinforcement equipment used for dubbing various events in large concert halls, stadiums and large open areas. The TD class circuitry used in the GS series amplifiers almost uncompromis..