Tascam DR-70D
Tascam DR-70D is designed for recording high-quality audio material in parallel with the digital DSLR camera. The recorder is mounted between the tripod and the camera or on top of the camera. Two built-in microphone allow the device to always be ready for recording. In addition, it has 4 XLT/TRS combo connectors for connecting professional microphones. Through the door on the camera, the stereo signal from the recorder can be recorded with a camera, code-tone signal for easier editing of the material. On the other hand, you can use the input from the camera for audio monitoring cameras with a recorder.
Features
- Compact, professional-grade audio recorder designed to be used in combination with a DSLR camera
- Uses an SD/SDHC/SDXC card as recording medium (up to 128 GB)
- High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
- NE5532 operational amplifiers for even higher audio performance (also used on DA-3000)
- In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
- Four channels can be mixed down to a stereo signal
- Recording levels can be adjusted independently for inputs 1-4
- Dual recording function allows two files to be recorded simultaneously at different levels
- Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
- Broadcast Wave Format (BWF) supported as WAV recording format
- Two built-in omnidirectional microphones
- Four XLR / TRS combo inputs can provide phantom power (+24V/+48V)
- +24 DBu maximum input level (20 dB headroom)
- Additional unbalanced input for channels 1 and 2 (stereo mini jack) supports mics that require plug-in power, allowing the input of video mics and other high-output mics
- Switchable low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz) Lets
- Switchable limiter to prevent clipping
- Audio can be output to a DSLR camera for recording
- Camera input enables convenient monitoring of audio from a DSLR camera
- Selectable mid-side decoding for use with MS microphone setups
- Slate tone functions (automatic/manual) to simplify synchronization of video files when editing
- A new file can be created during recording
- Selectable delay to eliminate time lags caused by differences in the distances of two input sources
- QUICK button allows easy access to various functions
- Slate tones can also be used for moving to specific locations
- Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
- File name format can be set to use a user-defined word or the date
- Resume function to memorize the playback position before the unit is turned off
- Line output and headphones output with individual level controls (3.5-mm jack)
- Dedicated remote control jack for use with RC-10 and RC-3F (sold separately)
- Hold switch to prevent accidental operation
- Low-noise buttons
- 128 × 64 pixel LC display with backlight
- USB 2.0 port
- Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
- DSLR bracket for easy camera attachment and removal
- Hot shoe mount (accessible when not using the DSLR bracket)
- Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
- Operates on four AA batteries, an AC adapter (sold separately: TASCAM PS-P515U), external battery pack (sold separately: TASCAM BP-6AA) or USB bus power