Your list
“Comparison list” is empty

(044) 592 78 50

  • Sign in | Register

Weatherproof speaker system QSC AD-S4T
Weatherproof speaker system QSC AD-S4T
  • About the product
  • Features
  • Accessories
  • Reviews
5 402
Back

Weatherproof speaker system QSC AD-S4T

Description

QSC AD-S4T

The AcousticDesign Series of installation loudspeaker products from QSC Audio expands with the new AD-S32T surface mount loudspeaker system. Designed for background and general purpose audio playback, the new AD-S32T is attractive, compact and acoustically matched to the entire AD Series. Rated for 30 watts continuous power handling and able to handle 120 watt peaks, the AD-S32T is a fully featured loudspeaker system in a very small package.

The 3" woofer is equipped with a polypropylene cone for protection in humid environments. The driver features a synthetic rubber surround and is optimized to deliver useable low-frequency extension below 70 Hz. An additional humbucking magnet provides AV shielding. The high-frequency device is a 0.75" dome tweeter with a titanium diaphragm and a cloth surround. The dispersion of the high frequency is 100° by 100°. The AD-S32T measures 85 dB SPL sensitivity.

Specs

  • Configuration: 2-way, ported enclosure
  • Low-frequency Transducers: 4.5” weather resistant paper cone woofer, 1”/25 mm voice coil
  • High-frequency Transducers: 0.75” silk dome tweeter/0.75” voice coil, horn loaded
  • Effective frequency range (-10 dB): 68 Hz - 20 kHz
  • Rated impedance: 8 ohms
  • Rated noise power/voltage: 50 watts/20 volts (rms)
  • Recommended amplifier power (loudspeaker "program" power): 100 watts
  • Sensitivity: 87 dB SPL
  • Coverage angle (-6 dB): 120° conical DMT
  • Directivity factor (Q): 6
  • Directivity Index: 8 dB
  • Maximum continuous SPL: 104 dB
  • Maximum peak SPL: 110 dB
  • Transformer taps:
    • 70 V: 30, 15, 7.5, 3.75 W and 8Ω bypass
    • 100V: 30, 15, 7.5 W and 8Ω bypass
  • Enclosure
    • Material: Painted ABS polymer
    • Finish: White or black (paintable)
    • Grille: Powder coated aluminum
    • Ingress protection IP-54
  • Operating environment Designed for indoor and outdoor use
  • The AD Series loudspeakers qualified for outdoor use using the following tests:
    • Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
    • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
    • High and low temperature: tested to QSC internal standards between -20° and 50° C
  • Input connector type: Euroblock connector with parallel output terminals
  • Dimensions (HxWxD): 261×161×163 mm
  • Weight: 2,9 kg
  • Included accessories: X-Mount mounting system, Euroblock connector, input panel cover
Code: 282927
5 402
There

Installment

270 / months.

In installments
We offer you to purchase the goods
by making our interest-free installment.
That is, You do not overpay for a commodity a dime!
Make it easy: after choosing goods in the store,
You pay the first installment and take out
the purchased item, and within the next 6 months
pay the remaining amount.

The terms of the installment purchase in the online store
Musician.ua:


• the recommended down payment is 60-70%;
• for regular customers with a positive history
of payments, possible contribution from 30%;
• you will pay the balance in equal installments.
Within the next 6 months from
the time of purchase

Узнать условия
The first installment 3781.4
6  payments 270.1
The sum of all payments 5402
Overpayment 0 ₴
Similar products
Description

QSC AD-S4T

The AcousticDesign Series of installation loudspeaker products from QSC Audio expands with the new AD-S32T surface mount loudspeaker system. Designed for background and general purpose audio playback, the new AD-S32T is attractive, compact and acoustically matched to the entire AD Series. Rated for 30 watts continuous power handling and able to handle 120 watt peaks, the AD-S32T is a fully featured loudspeaker system in a very small package.

The 3" woofer is equipped with a polypropylene cone for protection in humid environments. The driver features a synthetic rubber surround and is optimized to deliver useable low-frequency extension below 70 Hz. An additional humbucking magnet provides AV shielding. The high-frequency device is a 0.75" dome tweeter with a titanium diaphragm and a cloth surround. The dispersion of the high frequency is 100° by 100°. The AD-S32T measures 85 dB SPL sensitivity.

Specs

  • Configuration: 2-way, ported enclosure
  • Low-frequency Transducers: 4.5” weather resistant paper cone woofer, 1”/25 mm voice coil
  • High-frequency Transducers: 0.75” silk dome tweeter/0.75” voice coil, horn loaded
  • Effective frequency range (-10 dB): 68 Hz - 20 kHz
  • Rated impedance: 8 ohms
  • Rated noise power/voltage: 50 watts/20 volts (rms)
  • Recommended amplifier power (loudspeaker "program" power): 100 watts
  • Sensitivity: 87 dB SPL
  • Coverage angle (-6 dB): 120° conical DMT
  • Directivity factor (Q): 6
  • Directivity Index: 8 dB
  • Maximum continuous SPL: 104 dB
  • Maximum peak SPL: 110 dB
  • Transformer taps:
    • 70 V: 30, 15, 7.5, 3.75 W and 8Ω bypass
    • 100V: 30, 15, 7.5 W and 8Ω bypass
  • Enclosure
    • Material: Painted ABS polymer
    • Finish: White or black (paintable)
    • Grille: Powder coated aluminum
    • Ingress protection IP-54
  • Operating environment Designed for indoor and outdoor use
  • The AD Series loudspeakers qualified for outdoor use using the following tests:
    • Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
    • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
    • High and low temperature: tested to QSC internal standards between -20° and 50° C
  • Input connector type: Euroblock connector with parallel output terminals
  • Dimensions (HxWxD): 261×161×163 mm
  • Weight: 2,9 kg
  • Included accessories: X-Mount mounting system, Euroblock connector, input panel cover
Similar products
Type Active
Amplifier Not available
Effects Not available
LF Speaker 4 inches
MF Speaker No
HF Speaker 0,75 inches
Coil Size, inch Not available
Bass Reflex Front
Ways 2
Inputs Not available
Outputs Not available
Nominal Power, W 30 W
Peak Power, W 60 W
Resistance, Ohm 8 Ohms
Frequency Response 68 Гц - 20 kHz
Sensitivity, dB 110 dB
Crossover Frequency, Hz Not available
Overload Protection No
MP3-player No
Indicators No
Knobs Not available
Color White, Black
Mount Suspension Mount
Battery No
Dimensions, cm Not available
Weight, kg 2,8 kg
Warranty, month 12 months
There are no reviews for this product — be the first!
Leave a review
Put the assessment of
Your answer
Your comment will be published after moderation by the administrator
Weatherproof speaker system QSC AD-S4T Weatherproof speaker system QSC AD-S4T - 1 Weatherproof speaker system QSC AD-S4T - 2 Weatherproof speaker system QSC AD-S4T - 3 Weatherproof speaker system QSC AD-S4T - 4 Weatherproof speaker system QSC AD-S4T - 5 Weatherproof speaker system QSC AD-S4T - 6
Filter
Found 5 
Delete List

Are you sure you want to permanently delete this wish list?

To add itemsto Favorites, You need