High-Tech Self-Powered Subwoofer K-array KS5 High-Tech Self-Powered Subwoofer K-array KS5

K-array KS5

The K-array Mugello-KS5 is a self-powered subwoofer system. It is best suited for high-powered, extended bass response applications in arenas, theatres, stadiums, concert halls, houses of worship and outdoor events. K-array KS5The 21" loudspeakers feature neodymium magnets with 6" voice coils driven by powerful Class D amplifiers. The rear panel provides inputs for a balanced line signal, a balanced microphone signal with phantom power, and digital signals in AES/EBU protocol, also on an XLR for ease of cabling.

Features

• Self-powered
• Integrated DSP and remote control
• Onboard touch screen with matrix control
• RS485 and USB connectivity for remote control

Specs

Acoustics

• Power handling: 2x2500 W
• Max power: 8000 W
• Impedance: 2x2 Ω
• Frequency range: 25 Hz - 120 Hz
• SPL 1W/1mt: 99,5 dB
• Maximum SPL: 138 dB (cont.) - 142 dB (peak)
• Frequency response 20 Hz - 20 kHz

Coverage

• Horizontal: omni - cardio (array)
• Vertical: omni - cardio (array)

Crossover

• Type: Internal DSP controlled
• Frequency: Low pass150 Hz (maximum)

Transducers

• Type: 2x21" (Neodymium magnet woofer with 5,5" voice coil)

Audio In/OUT

• Analog connectors: 2 male + 2 female 3-pin balanced XLR
• Digital connectors: 1 male + 1 female 3-pin balanced XLR

Remote control input

• Connectors: 1 male + 1 female XLR parallel
• 1 USB B Jack serial converter

Amplifier

• Type 1 module class D - DSP controlled
• Subwoofer Power Output 2 x 3500 W @ 2 Ω 1% THD + NOISE

Protections

• Over Temp.(Power Limiting – Thermal Shutdown)
• Short Circuit/Overload Output Protection
• Power Limiting
• Clip Limiter/Permanent Signal Limiter
• High Frequency Protection

AC Power

• Nominal power requirements 100 - 240 Vac ± 10% 50-60 Hz
• Operating Range 90 – 264 Vac (auto-range)

Consumption

• Power factor (cosφ) >0,90/4Ω full power
• 1/8 rated power (pink noise)/4Ω 600 W

Physical

• Dimensions: 59x85x116,2 cm
• Weight: 104,4 kg