Park Audio D422e
Application: PA system for indoor and outdoor use: clubs, bars, restaurants, music bands. Versions: active with built-in DSP engine.
Features
- Optimal curvature of the line array, consisting of ywo elements(LF 8”+ HF 2 х 1”) to provide advanced vertical coverage
- Maximum Output SPL 127 dB SPL
- Frequency Range 70 Hz – 18 kHz
- Coverage 100°H x 22°V
- Flange for mounting to the speaker stand
- Adjustable vertical til ±13.5° (step 4.5°)
- 16 suspension points M10 for mounting to the loudspeaker
- Cabinet material – 15 mm birch plywood
- Cabinet coating – black water-polymer paint
- Protective grid – perforated steel with powder coating
- Additional moisture protection – acoustically transparent foam (glued to the inner surface of the grid)
- Built-in amplifier 2 х 700 W RMS with DSP engine for FIR settings
- Amplifier cooling system – forsed with smoothly veriable intensity
- Switching power supply with PFC
- Power requirements – ~160 – 280 V
- Input level control
- Line input/output – XLR / XLR
- Line input switch: THRU, OUT to subwoofer
- THROW switch(HF signal level):SHORT, MIDDLE, LONG
- LF level switch: NORM, LF BOOST
- Detachable power cord
Specs
- Acoustic System
- Configuration: Active two-way line array
- LF driver: 2 x 8"dia B&C SPEAKERS, voice coil 2"
- HF driver: 4 x 1"dia B&C SPEAKERS, voice coil 1.4"
- Acoustic Design: Trapezoidal cabinet. Bass Reflex
- Power Handling (nom./continuous)
- HF: 100 / 200 W
- LF: 400 / 800 W
- Frequency Range
- NORMAL Mode: 110 Hz - 18 kHz
- LF BOOST Mode: 70 Hz - 18 kHz
- Coverage: 100°H x 22°V (-6 dB)
- Maximum Output SPL*: 127 dB/ 1 m
- Weight: 21 kg
- Dimensions
- Width: 398 mm
- Height(front/rear): 452/364 mm
- Depth: 364 mm
- Built-in 2-channel power amplifier with DSP engine
- Power Rating (RMS): 2 х 700 W, class D
- Sensitivity: 775 mV
- Impedance: 10 kOhms
- Signal-to-Noise Ratio: 98 dB (unweighted)
- Input/ Line output: XLR/XLR
- Cooling: Forced**
- Power Requirements: ~160 - 280 V, 50 / 60 Hz
- DSP engine
- Sampling Rate: 48 kHz
- DAC/ADC: 24-bit
- Internal Processing: 56-bit
* For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
** With smoothly variable intensity. At a normal temperature and low output level the fan is OFF.