Line array Speaker K-array Kobra KK52/KK52W White

K-array Kobra KK52/KK52W

The K-array KK52 is a passive speaker system comprised of eight 2" neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis. The vertical dispersion pattern can be switched for wide or narrow coverage, allowing for a great variety of applications. The eight closely spaced cone drivers provide true line array characteristics - phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.

A variety of rigging accessories provides many linking and hanging options for the KK52 (0,5 meter) and the larger (1 meter) KK102 to be combined in vertical and horizontal line array configurations to satisfy many different venue requirements during temporary events and for permanent installations. For easier use and integration with other speakers or amplifiers, the KK52 allows the user to select two different values of impedance (16Ω – 64Ω). At 64Ω as many as 8 KK52 speakers can be powered off a single amplifier channel at 8Ω (up to 16 elements @ 4Ω).

The KK52 is able to reproduce the whole vocal frequency range with high intelligibility, starting from 150 Hz. Integrating one of the K-array powered subwoofers (KMT12, KMT18, KMT21), configured with specific presets for the KK52 assures excellent coverage of the entire musical frequency range. The K-array KA amplifier series have pre-sets optimized for KK52 use. All Kobra KK52 components are designed by the K-array R&D department and custommade under the K-array quality control system.

Features

• Unique performance-to-size ratio
• Vertical, horizontal and 3D line array applications
• Multiple 2” long-excursion, full range cone drivers
• Wide horizontal coverage
• Weather proof, suitable for outdoor installations - IP54

Specs

Acoustics

• Power handling: 200 Watts (AES)
• Frequency range: 150 Hz - 20 kHz
• Impedance: 16 Ω/64 Ω (selectable)
• SPL 1W/1mt: 95 dB
• Maximum SPL: 118 dB (cont.) - 124 dB (peak)

Coverage

• Horizontal: 110°
• Vertical: 10°/60° (selectable)

Crossover

• Type: External Crossover required
• Frequency: High pass/150 Hz, 24 dB/oct suggested minimum

Selection Switches

• Impedance: 16 Ω/64 Ω
• Coverage: Spot/Flood

Power Audio Input/Output

• Connector: 2x4-pin Speakon
• Wiring: 1+1- (signal IN & LINK); 2+2- (through)

Other

• Transducer: Full range 8x2" (Neodymium magnet with 0,75" voice coil)
• Recommended Amplifiers: Type KA24, KA84, KMT
• Certifications: IP 54
• Dimensions: 5,9x8,1x50,0 cm
• Weight: 2,3 kg