Power amplifier Lab.Gruppen LUCIA 120/2M

Product code: LG-0002

Manufacturer:
For physical goods, free delivery is available to your address using the Nova Poshta service for orders over 1000 UAH.

Lab.Gruppen LUCIA 120/2M

Lab.gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings superior audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed. In many AV applications requiring consistently outstanding performance, LUCIA offers a logical, cost-efficient and scalable solution that often eliminates the complications and added expense of a centralized equipment room. LUCIA amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable and highly efficient Lab.gruppen output stage, all of which make LUCIA the best-sounding and most reliable compact amplifier in its category.

LUCIA 120/2M has been designed and engineered for quick installation and easy setup. The supplied wall-mount bracket enables discreet on-wall location (such as behind video displays), but the ultra-compact form factor also allows easy placement virtually anyplace – whether next to a projector or integrated into a reception counter, podium & lectern or bar area. All input and output connections are on Euroblock screw terminals (with parallel unbalanced RCA connectors), and level setting is available on front-panel potentiometers. Advanced circuitry protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage. The LUCIA 120/2M incorporates a digital front end with a 4x4 Mix Matrix and comprehensive DSP features, including proprietary Automatic Dynamic Loudness Contouring (ADLCTM) and a full selection of EQ filters both before and after the matrix – features that eliminate the need for external mixers and processors in many applications, saving time and money. A software wizard facilitates fast setup, while the advanced editor allows offline configuration of common presets that can be quickly downloaded to multiple units via USB.

Specs

Model: LUCIA 120/2M

General:

  • Number of amplifier channels 2
  • Max total output all channels driven 120 W
  • Max output voltage per channel 1 31.0 V peak
  • Max output current per channel 5.5 Arms

Max output power (all channels driven):

  • 2 ohms 60 W
  • 4 ohms 60 W
  • 8 ohms 60 W
  • 16 ohms 30 W

Performance:

  • THD 20 Hz - 20 kHz at 1 W into 8 ohms: <0.3%
  • THD at 1 kHz and 1 dB below clipping: <0.2%
  • Signal to Noise Ratio: >92 dBA
  • Channel separation (Crosstalk) at 1 kHz: >60 dBA
  • Frequency Response: 5 Hz - 22 kHz
  • Input impedance: 10 kOhm
  • Common Mode Rejection (CMR): 40 dB

Gain, Sensitivity and Limiters:

  • VPL for 4 ohm mode: 31 V
  • VPL for 4 ohm mode: 31 V
  • VPL for 2 ohm mode: 22 V
  • VPL for 2 ohm mode: 15 V
  • Sensitivity, balanced input: 4 dBu/1.23 Vrms
  • Sensitivity, RCA input: -2 dBu/0.62 Vrms
  • Input headroom for clip, balanced 2: 12 dBu/3.09 Vrms
  • Input headroom for clip, RCA 2: 6 dBu/1.55 Vrms

Connectors and Buttons:

  • Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced
  • Input connectors (ch. 1 & 2): Unbalanced RCA type
  • Output connectors (per ch.): 2 - pin detachable screw terminals
  • GPI (power control input) 3: 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.
  • GPO (power state output) 3: Contact closure type, 2 pins in a detachable screw terminal
  • Default for external monitoring of fault/protection/power off
  • RS232 4: Can be controlled and monitored by third parties via RS232 using both the GPI pins
  • USB: For firmware update and configuration for the matrix models
  • Cooling: One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
  • Auto mode: The power state is controled automatically by the audio signal
  • Level adjustment (per channel): Front panel potentiometer, detented from -inf to 0 dB

Processing Features:

  • Input processing block 5: Default with 16 parametric EQs
  • Mix matrix routing block 5: 4 in - 4 out mix-matrix controllable from GPI
  • Output processing block 5: 4 EQ sections per output (presets available for many loudspeakers); User adjustable output look ahead limiter; ADLC (Adaptive ISO 226 compensation)
  • Two line level outputs 6: Each capable of driving 10 LUCIA devices in parallel
  • Latency from any input to any output: User adjustable from 9.15 to 137 ms

Power:

  • Nominal voltage: 100 – 240 VAC
  • Operating voltage: 85 – 265 VAC
  • Mains connector: IEC inlet

Dimensions: 216x44x280 mm

Weight: 1.9 kg

There are no reviews for this product.

Write a review

Please login or register to review

There are no references for this product.