QSC AD-P6T

The QSC AcousticDesign™ AD-P6T is a 6.5" two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.

The AcousticDesign™ Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign Series allows integrators seamless transitions within blended installations.

DMT (Directivity Matched Transition™) is QSC’s design philosophy where the high frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent transition between transducers with improved off-axis power response for consistent 150° conical DMT coverage.

The AD-P6T features a high quality 6.5" weather treated paper cone woofer with a 1" voice coil and a 0.75" aluminum dome tweeter positioned on a DMT waveguide.

Specs

Low-frequency Transducers: 165 mm [6.5 in] weather treated paper cone woofer
High-frequency Transducers: 19 mm [0.75 in] aluminum dome tweeter
Effective frequency range (-10 dB): 55 Hz – 20 kHz
Rated coverage (-6 dB): 135° conical DMT™
Rated noise power/voltage: 60 watts/22 volts (rms)
Recommended amplifier power: 120 watts
Nominal impedance: 16 ohms
Sensitivity: 88
Directivity factor: 6.5
Directivity index: 8 dB
Maximum continuous SPL: 106 dB
Maximum peak SPL: 112 dB
Transformer:
- 7.5W (70V); 15W (100V) Tap: 667Ω
- 15W (70V); 30W (100V) Tap: 333Ω
- 30W (70V); 60W (100V) Tap: 167Ω
- 60W (70V); N/A (100V) Tap: 83Ω
- Bypass: 16 ohms
Enclosure
- Material: Impact Resistant ABS
- Grille: Powder coated steel
- Ingress protection: IP-34
Operating environment: Designed for indoor use
Operating temperature range: -20 to 50 °C
Connectors: Euroblock connector with parallel output
Product dimensions (Ø×H): Ø 287×323 mm
Weight: 4,2 kg
Included mounting hardware: Two quick-link cable assemblies (length 3.25m, thickness 2mm ), 2x slip-lock fasteners, locking euro-block connector, sealable input cover and screws, snap-fit magnetic grille.