Player Tascam CD-9010 CF

Description:

• Media and File Formats
• Supported media (types): CD-R (audio CDs CD-DA, CD data ISO9660 Level1 / Joliet / Romeo), CD, CF card (Type I, 512 MB - 64 GB)
• Playback WAV format: 16/24-bit, 44.1 / 48kHz
• File size (maximum): 2 GB
• CD-DA: 16-bit, 44.1
• Channels (number) x 2 (stereo) x 1 (mono)
• Inputs and outputs (analogue)
• Balanced input MIX (type): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
• Resistance (Input): 10 k
• Input nominal level of +4 dB (1,23 Vrms)
• Input Level (maximum): 24 dB (12.28 Vrms)
• Balanced line outputs (type): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
• Resistance (output): 200 ohms
• Output nominal level of +4 dB (1,23 Vrms)
• The output of the maximum level: 24 dB (12,28 Vrms)
• Monitor Outputs: XLR-3-32 balanced (1: GND, 2: HOT, 3: COLD)
• Resistance (output): 200 ohms
• Output nominal level of +4 dB (1,23 Vrms)
• The output of the maximum level: 24 dB (12,28 Vrms)
• PHONES jack Stereo standard (6.3 mm)
• Output power (max): 45 mW + 45 mW (THD + N 0,1%, 32 ohms)
• Digital audio outputs
• Digital output: BNC
• Format: AES-3id-2001, IEC60958-4 (AES / EBU), AES3-2003
• Resistance (output): 75 ohms
• The inputs and control outputs
• WORD IN (type): BNC (switchable limiter hours)
• Voltage (Input): 5V (equivalent to TTL)
• Resistance (Input): 75 ohms
• Tolerances (the frequency of the external synchronization) + -100 ppm
• WORD THRU (type): BNC
• Voltage (output): 5V (equivalent to TTL)
• Resistance (output): 75 ohms
• REMOTE IN (serial): 15-pin D-Sub
• REMOTE IN (parallel): 37-pin D-Sub
• Input Voltage (Max): 5.5 V
• Input voltage (min, high-level): 3.75 in
• Input voltage (minimum, low): 1.25 V
• Output format: open drain (max 100 mA, 50 V).
• The maximum output voltage at a low level: 0.5
• Maximum applied current (5V) 100 mA
• Keyboard (Type): USB-type (uses a four)
• Protocol (Type): USB 1.1, low speed (1.5 Mbit / s)
• Maximum applied current (5V) 500 mA
• Audio Features
• All audio have ratings are for playback in accordance with JEITA CP-2150 standards.
• Frequency response: 20 Hz - 20 kHz + - 0.5 dB
• Distortion: 0.005% or less
• Dynamic range: 95 dB or more
• The ratio of the noise / signal: 100 dB or more
• Channel separation: 95 dB or more
• Power Requirements
• Power: 50/60 Hz, AC 100-240 in
• Power (consumption): 18 Watts
• Temperature range (operating): 5-35 degrees
• The installation angle: 5 degrees or less
• Dimensions (width x height x depth): 220 mm x 137 mm x 385 mm
• Weight: 5.5 kg.