QSC AD-S162T

The QSC AcousticDesign™ AD-S162T is a columnar array line consisting of 16 weather treated 2.5" transducers. Columnar loudspeakers are ideally suited for a wide variety of acoustically difficult applications where speech intelligibilty is a primary concern.

The AcousticDesign Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign Series allows integrators seamless transitions within blended installations.

With rugged powder coated aluminum construction, stainless steel hardware, and sealed input panel cover, the AD-S162T is designed for indoor or outdoor use, exceeding IEC60529 IP-54 ratings for dust and splash resistance.

The accurate frequency response of the AD-S162T is maintained even in 70/100V applications by use of a low-loss, low-saturation transformer with selectable taps, including a bypass for low impedance application, using a rotary selector located behind the sealed input cover plate.

Specs

Low-frequency Transducers: 16× 2,5 in (70 mm) weather treated paper cone woofer
Effective frequency range (-10 dB): 90 Hz – 17 kHz
Rated noise power/voltage: 200 watts/40 volts (rms)
Recommended amplifier power: 250 watts
Sensitivity: 89 dB SPL
Coverage angle (-6 dB, Horizontal × Vertical): Rated 160×15 (Narrow)/30 (Wide), 180×52/52, 1kHz: 180×26/28, 2kHz: 160×18/28, 4kHz: 180×13/30
Directivity Index: 11 dB (Narrow)/13 dB (Wide)
Maximum continuous SPL: 112 dB (Narrow)/111dB (Wide)
Maximum peak SPL: 118 dB (Narrow)/117 dB (Wide)
Transformer taps:
- 15W (70V); 30W (100V) Tap: 333 Ohms
- 30W (70V); 60W (100V) Tap: 167 Ohms
- 60W (70V); 120W (100V) Tap: 83 Ohms
- 120W (70V); N/A (100V) Tap: 42 Ohms
- Bypass: 8 Ohms
Enclosure
- Material: Powder coated aluminum
- Grille: Powder coated aluminum
- Ingress protection: IP-54
- Operating temperature range: -20 to 50 °C
Input connector type: Euroblock connector with parallel output
Dimensions (HxWxD): 1162×131×126 mm
Weight: 11,8 kg
Included accessories:
- Sealed input cover plate with gland nut
- Quick Hang Pan/Tilt wall bracket
- Shoulder eyebolt safety tether anchor