RME ARC USB

This wired remote has been designed for direct access to the most frequently used actions and commands of TotalMix FX, being an indispensable tool in the studio's daily applications. Its extremely flexible configuration through TotalMix FX will simplify workflow and greatly increase the usability of the RME interface in most real world situations.

The ARC USB is a USB 1.1 (UAC1) MIDI remote control, natively compatible to Windows and Mac OS X. As soon as it is present in the operating system TotaIMix FX will detect it and communicate with it, without disturbing other remote controls. Therefore it is also not necessary to switch the ARC USB on or off within TotalMix FX - it will just work. And because it communicates with TotalMix FX (via USB) it is compatible to all RME audio interfaces that are detected and supported by TotalMix FX. This goes back to RME interfaces released 2001!

As soon as the ARC USB is connected to a computer any button press or wheel turning will cause the respective action performed by TotalMix FX - and therefore also by the RME audio interface. With the UFX+ and UFX II the ARC USB can also be connected directly to these devices, currently the only RME interfaces having an internal USB 1.1 host with matching connector. This way of connecting is handy in stand-alone mode, where the ARC USB is also supported by the UFX+ and UFX II.

Key commands:

Talkback: is lit dim as soon as the ARC USB is running on 5 V USB bus power
Speaker B: is lit dim as soon as a USB communication is possible
DIM: is lit dim as soon as a communication with TotalMix FX is established
Therefore in normal operation all three lower keys are lit dim constantly
Row 1 and 2: activating Snapshots 1 to 8
Row 3: Mono, Volume Phones 1, Volume Phones 2, External Input
Lower keys: Talkback, Speaker B, Dim
A set of stickers with all currently available TotalMix FX commands is included - these can be used to label all keys reflecting the current user configuration
The rotary encoder wheel is used to change various parameters, like gain and volume, it is programmable in TotalMix FX as well

The Advanced Remote Control is configured in the Options menu via the Key Commands dialog of TotalMix FX, tab ARC USB Settings. As the ARC does not have any memory, all configuration and storage is done via TotalMix FX. All settings of the ARC USB are stored within a Workspace, and are therefore identical in all Snapshots of that current Workspace.

More than 36 different commands can be assigned to the 15 keys. The behavior of each individual button can be changed between push, toggle, enable and disable, depending on the base function.

Available funсtions:

No Funktion
Global Mute
Global Solo
Mute Group 1 to 4
Solo Group 1 to 4
Fader Group 1 to 4
Link Main AB
Speaker B Select
DIM (Main Out)
Mute (Main Out)
Mute FX (Main Out)
Mono (Main Out)
Talkback
External Input
Reverb
Echo
Cue Phones 1 to 4
Snapshot 1 to 8
Layout Preset 1 to 8
Volume Main
Volume Phones 1 to 4
Mic Gain 1, Mic Gain 2, Mic Gain 1+2
Inst. Gain 3, Inst. Gain 4, Inst. Gain 3+4
Mic/Inst. Gain 9, Mic/Inst. Gain 10, Mic/Inst. Gain 9+10
Mic/Inst. Gain 11, Mic/Inst. Gain 12, Mic/Inst. Gain 11+12

Some commands are not available at certain interfaces, or slightly changed due to different functionality. Fireface UFX and UFX+ have additional commands for DURec: Record, Play and Stop.

Several functions can be activated at the same time. Example: Button 1 is set to Cue Phones 1. That means the phones submix is heard via the Main output (the studio monitors). To be able to also change the volume of the phones submix itself, set button 2 to Volume Phones 1. Activating both will allow you to listen to the phones submix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.

A standard footswitch (with switch, sustain pedals with pot are not supported) can be connected to the 1/4" TS jack on the left side. In Key Commands Settings the same options are available for the footswitch as for the 15 keys.