Loudspeaker systems (satellite) JBL AWC82

JBL AWC82

Highly weather-resistant IP56 rating. Consistent 120°x120° broadband pattern control. Components: 200 mm (8") woofer with Kevlar-reinforced cone and 50 mm (2") voice coil, 25 mm (1") exit compression driver with unique patented design and high temperature polymer diaphragm. Extraordinary clarity for speech, with extended frequency response for music.

Advanced high-slope crossover network for constant coverage and smooth, natural midrange. 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability. High-power passive crossover network. Overload protection. 80 Hz - 20 kHz frequency response. 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.

Specs

• Frequency Range: 80 Hz - 20 kHz
• Coverage Pattern 120°x120°
• Directivity Factor (Q): 8,1
• Directivity Index (DI): 8,4 dB
• Long-Term System Power Rating (IEC): 250 W 2 hrs, 200 W 100 hrs
• Sensitivity: 94 dB
• Maximum SPL Direct 8 Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
• Crossover Network: 1,8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
• Nominal Impedance: 8 Ohms
• Transformer Taps: 70V - 200W, 100W, 50W, 25W/100V - 200W, 100W, 50W
• LF Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil
• HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, High temperature polymer diaphragm, Patented design, Fluid-cooling, Protection Minimum audibility SonicGuard™ HF overload protection
• Enclosure: ABS with Glass enclosure, heavily braced
• Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel
• Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing
• Input Connection: CE-compliant covered barrier strip terminals, Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2,5 mm2 (12 AWG) wire or spade lugs, Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4,0 mm (0,16") and 9,0 mm (0,36")
• Dimensions: 30x30x31 cm
• Net Weight: 10 kg