Landscape speaker JBL Control 85M

JBL Control 85M

The Control 85M Mushroom-Style Landscape Speaker is a two-way highly weather resistant speaker offering excellent full-range sound quality and 360 degree coverage of the listening space. Designed to be mounted on or in the ground, the Control 85M can be used in a wide variety of applications including hotels, casinos, pool areas, shopping malls, theme parks, sports venues, resorts, restaurants, hospitality and leisure venues, entranceways, and anywhere a high quality music and/or paging speaker landscape speaker is required

Its compact size allows the speaker to blend into landscaping and shrubbery, while its tough hunter green polyethylene enclosure resists abuse from lawn care equipment and the elements. The enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

The two part enclosure is designed to open with a twist for wiring and then close securely. The bottom base section of the enclosure can be pre-installed and then wired to the top speaker section of the enclosure. When assembled, the bottom base section becomes afully isolated chamber, keeping the speaker and transformer (in the speaker section) highly isolated from the possibility of intruding moisture. Multiple locations on the bottom and sides are provided for the mounting of the exterior gland nut (installed by drilling a 22 mm (0,875 in, 7/8 in) diameter hole in the chosen location), and a second gland nut is positioned between the bottom base and the top speaker sections, to keep the speaker system highly weather tight.

Included gland nuts maintain a water-tight seal only when used with round-jacketed cable with outside diameter between 4 and 9 mm.

All external hardware is stainless steel, and the powder-coated stainless steel grille resists rusting. The Control 85M can be secured to the ground via third-party ground stakes using the three attachment points that extend out from the bottom section of the speaker.

The 135 mm (5,25 in) diameter low-frequency driver features a Kaptonformer with 35,5 mm (1,4 in) voice coil for high power handling and superior long term reliability. The polypropylene cone and polyurethane surround provide high strength and superior moisture resistance. The 19 mm (0,75 in) high frequency driver utilizes a polyetherimide dome, providing high rigidity, strength, and high temperature resistance. The high slope crossover provides natural sonic character and SonicGuard™ protected HF-driver ensures long-term reliability from occasional overdriving.

In addition, the speaker contains a high-quality 30 Watt multi-taptransformer for use on 70 V or 100 V distributed loudspeaker lines, andis switchable for 8 ohm voice-coil direct operation. The speaker handles 80 Watts Continuous Pink Noise (160 W Program, 320 W Peak) in the8 ohm mode.

Included accessories: 2 wire nuts, 2 gland nuts, 1 right-angle screwdriver. Color: Hunter Green.

Specification

• Frequency Response (-10 dB): 55 Hz – 18 kHz
• Frequency Response (±3 dB) 65 Hz – 16 kHz
• Power Rating: 160 W Continuous Program (2 hrs), 80 W (320W peak), Continuous Pink Noise (2 hrs), 45 W (180W peak) Continuous Pink Noise (100 hrs)
• Transformer Taps 70 V: 30 W, 15 W, 7,5 W & 3,8 W
• Transformer Taps 100 V: 30 W, 15 W, 7,5 W
• Maximum Input Voltage: 23,3 V
• Sensitivity: 86 dB, 1W @ 1m (ave. 80Hz – 16kHz)
• Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
• Directivity (Q): 2,2
• Directivity Index (DI): 3,4 dB
• Maximum SPL: 105 dB @ 1m
• Nominal Impedance: 8 Ω (at 8 Ω setting)
• Insertion Loss: <1 dB at any tap setting
• Thru Setting: 8 Ω nominal
• Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF
• Recommended Protective High-Pass: 65 Hz for 8Ω operation, 24 dB/oct; 60 Hz for 30 W tap, 24 dB/oct; 50 Hz for 15 W, 7,5 W, and 3,7 W taps, 24 dB/oct
• Low Frequency Driver: 5,25" diameter LF driver, Kapton™ former, 1,4" voice coil, polypropylene cone and polyurethane surround
• High Frequency Driver: 0,75" diameter HF driver Polyetherimide (PEI) dome
• Enclosure Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated
• Grille: Powder coated stainless steel
• Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated
• Agency Ratings: UL1480, Transformer UL Recognized per UL1876, ROHS compliant
• Terminals: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
• Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0,875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4 mm and 9 mm (0,16” in and 0,35” in). For installation instructions see Installation Guide (# IS C80MLS)
• Dimensions: (HxWxD) 43,2x29,1x29,1 cm
• Weight: 5,5 kg