Audio interface Focusrite iTrack Dock
Whatever type of music you want to make, iTrack Dock is the easiest way to create professional recordings on iPad. Just dock, plug in and hit record. Start recording the moment inspiration strikes, by plugging any instrument or mic straight in. You don't need to learn anything new. Record your songs directly into Garageband, Cubasis, Auria and many other apps. Upload your tracks straight to Facebook, Soundcloud and YouTube. Make studio-quality recordings that are good enough to release. We've been making audio hardware for 30 years. Sam Smith, Foo Fighters, Radiohead - they all use our gear, because it sounds better than anything else. You won't need anything else to make professional recordings on iPad. iTrack Dock Studio Pack includes a high quality microphone and headphones, too.
Characteristics:
Analogue Input Performance - Mic:
- Frequency Response: 20Hz - 20kHz +/- 0.2 dB (minimum gain)
- THD+N: < -99dB (minimum gain, -1dBFS input with 20Hz/20kHz bandpass filter)
- Equivalent Input Noise (EIN): < -125dBu CCIR-RMS (measured at maximum gain with 150 ohm termination)
- Gain Range: -4dB to +46dB (dBFS / dBu) ±1dB
- Max Input Level: >+4dBu (at 1% THD)
Analogue Input Performance - Line:
- Frequency Response: 20Hz - 20kHz +/- 0.2dB (minimum gain)
- THD+N: < -98dB (min gain, -1dBFS at output and 20Hz/20kHz bandpass filter)
- Noise (NiPoS): <-104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
- Gain Range: -22dB to +28dB (dBFS / dBu) ±1dB
- Max Input Level: >+21dBu (at 1% THD)
Analogue Input Performance - Instrument:
- Frequency Response: 20Hz - 20kHz +/- 0.2dB (minimum gain)
- THD+N: <-90dB (min gain, measured at Max Input Level -1dB, 20Hz/20kHz bandpass filter)
- Noise: <-104dBu CCIR-RMS (measured at min. gain)
- Gain Range: -16dB to +34dB (dBFS / dBu) ±1dB
- Max Input Level: >+14dBu (at 1% THD)
Analogue Output Performance:
- Nominal Output Level: 0dBFS = >+10dBu, balanced
- Frequency Response: 20Hz - 20kHz +/- 0.2dB
- THD+N: < -100dB, balanced (0dBFS input 20Hz/20kHz bandpass filter)
Digital Performance:
- Clock sources: Internal clock only
- D-A Dynamic Range: 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
- Supported sample rates: 44.1 KHz, 48 KHz, 96 KHz 24 Bit
Input Metering:
- Ring LED lit Green: Signal present (-24 dBFS)
- Ring LED lit Red: Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions:
- Height: 64mm
- Width: 280mm
- Depth: 168
- Weight: 0.7 Kg