Control Panel Apart PM1122RL

Apart PM1122RL

The PM1122RL is a very affordable remote control panel with local audio input (mini-jack and XLR) for the PM1122, Apart's multifunctional pre-amplifier.

The control panel offers music level control, line source selection and microphone mix level control. The PM1122RL also adds a double local source input, which means that there can be a microphone on the XLR and/or an MP3 player, or a pc or other line input on the stereo mini-jack connector. However, the local source input is always mono. There can be phantom power to the XLR connector by setting a jumper on the pack of the control panel.

The remote panels are connected to the PM1122 by a standard CAT-5 cable wired according to the T-568B protocol. The maximum wire length is up to 300m, according to circumstances. You can use one PM1122RL per zone. Mounting screws are included.

Specs

• Control:
  • Level sources A/B/C/D and a microphone: 0-10V
  • Source selection A/B/C/D: DC voltage
  • Power supply: via CAT5/RJ-45 cable from PM1122
• Line input:
  • Connector: 1/8" stereo mini jack (followed by a mono mix)
  • Frequency range: 20 Hz - 20 kHz
  • Sensitivity/impedance: 250 mV/ -12 dB, 17 kΩ
  • Maximum input level: -3 dBV
  • Signal to noise ratio: >80 dB
  • The coefficient of nonlinear distortion: <0,09%
  • HF/LF adjustment: from 100 Hz/+3 dB, 10 kHz/-6 dB to 100 Hz/-9 dB, 10 kHz/+4 dB
• Microphone input:
  • Connector: XLR in balanced mode
  • Frequency range: 100 Hz - 20 kHz
  • Sensitivity/impedance: 3 mV/-50 dB, 1,2 kΩ
  • Signal to noise ratio: >75 dB at 4 mV level
  • The coefficient of nonlinear distortion: <0,15%
  • HF/LF adjustment: from 100Hz/+ 3dB, 10kHz/-6dB to 100Hz/-9dB, 10kHz/+ 4dB
• Dimensions: 93x101 mm, depth 40 mm
• Weight: 320 g

Mounting boxes (not included):

• BBi2 - for indoor installation
• BB2 - for outdoor installation