UHF Series 21 Lanen
The specially adapted impedance means that you can reproduce the high definition sound of a wired system in UHF. We also made sure that the electronics for the UHF side would prevent any interference, and that signal integrity would be optimized no matter what the conditions. Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound quality.
What about this system?
"Whatever wireless system you're using, the most important aspects are the audio quality and the stability. We've made the UHF Series 21 system in metal to give you perfect insulation, and to make sure your UHF sound is the same as wired sound: dynamic, rich and balanced. The UHF wireless system uses an extremely stable phase-locked loop circuit and a dual antenna/dual receiver analogue wireless system (True Diversity) to prevent interference problems and guarantee signal integrity at all times. Now your instruments can really strut their stuff in UHF with absolutely no compromise on sound."
Ludovic Lanen - Sound Engineer
System:
- Receiving mode: UHF True Diversity
- Number of channels: 100 PLL selectable frequencies
- Frequency range: 640MHz - 675MHz
- S/N Ratio: >85dB
- Total harmonic distorsion: <0.3% à 1KHz
- Bandwidth: 30 at 18000Hz (±3dB)
- Range in meters: approx 100m
Receiver:
- Outputs: Jack (unbalanced) XLR (balanced)
- RF squelch: >80dB
- Weight: 800g
- Dimensions (W x D x H): 210mm x 160mm x 53 mm
Bodypack:
- Connections: MiniXLR with Jack 6.35mm active cable
- Max output power: 8mW
- Max SPL: 130dB
- Battery (non supply): alkaline battery (AA) or rechargeable battery NiMH type
Caution
This piece of radio equipment is designed to be used at professional musical events or similar and for radio broadcasts. This equipment conforms to the requirements of the 2014/53/EEC (RTTE) European Directive.
The frequencies used are subject to license in Belgium and Germany. Before using the equipment, please act in accordance with the provisions of the law currently operating in your country.