QSC Cinema SB-15121
Part of the DCS Digital Cinema Speaker Series, QSC’s SB-15121 subwoofer offers the highest performance available for cinema subwoofer applications. It is designed for use in premiere cinemas and post-production applications where the ultimate in performance is required.
The massive 21” low-frequency transducer features a 6” diameter voice coil in a vented, neodymium magnet structure that is designed to dissipate extreme amounts of heat and allow for excursion that is double that of typical 18” transducers. This ensures cool operation, even at high power levels, increases driver lifespan and decreases power compression at high drive levels.
The large, ported enclosure ensures response to the lowest audible frequency for bass that you can not only hear but also feel. The enclosure is constructed of high quality, heavily braced MDF Panels. Large, fully radiused ports ensure smooth airflow, especially at higher drive levels. This prevents potentially audible port turbulence noise. Both internal and external port openings are flared.
With symmetrical port loading, the bass ports are evenly spaced on each side of the transducers, making internal pressure more uniform across the back surface of the woofer. This prevents the cone from being displaced to one side or another by unbalanced air pressure, reducing the chance of driving the voice coil out of the center of the gap at high drive levels.
Specs
- Frequency Range
- -6 dB half space: 23,8 Hz – 100 Hz
- -10 dB half space: 21,5 Hz – 100 Hz
- Maximum Output
- Calculated Peak at rated power: 137 dB
- Calculated Continuous: 131 dB
- Impedance: 4 ohms nominal
- Maximum Input Power:
- 100 hours of 6 dB crest factor pink noise, 25 Hz – 250 Hz: 1500 W RMS
- 2 hours of 6 dB crest factor pink noise, 25 Hz – 250 Hz, AES method: 2500 W RMS
- Recommended Amplifier Power: 3400 W RMS maximum/1200 W RMS minimum
- Sensitivity 2 V/1 meter, half space: 99 dB 40 Hz – 100 Hz
- Transducers: One 21" (533 mm) high efficiency subwoofer transducer featuring a vented 6" (153 mm) copper voice coil on a fiberglass former. High excursion/low distortion design, with extremely high power handling and low thermal and port compression. Neodymium magnet to provide a very high force factor and linear excursion
- Recommended Processing: HPF at 20 Hz, minimum 12 dB/Octave slope
- Nominal Coverage: Omnidirectional (80 Hz)
- Connectors: Barrier strip screw terminals accept up to #10 AWG stranded wire. Four terminals; two inputs and two parallel outputs.
- Enclosure: Vented enclosure with symmetrical port design, tuned to 25 Hz, constructed of medium density fibre-board and heavily braced. Features vandal resistant woofer mounting bolts.
- Dimensions (HWD): 1238x762x610 mm including feet
- Weight: 105 kg