Lab.Gruppen FP 6000Q/BP
The FP 6000Q is the sister amplifier to the flagship FP 10000Q four-channel model in the FP+ Series. At the core of the FP 6000Q’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 6000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power and channel density of the FP 6000Q. The FP 6000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. NB. operation of NomadLink requires the NLB 60E NomadLink Bridge & Network Controller which must be purchased separately.
Specs
Model: FP 6000Q
General:
- Number of amplifier channels 4
- Peak total output all channels driven 6000 W
- Peak output voltage per channel 101 V
- Max output current per channel 38 A peak
Max output power (all channels driven):
- 2 ohms 1500 W
- 4 ohms 1250 W
- 8 ohms 625 W
- 16 ohms 320 W
Max output power bridged:
- 2 ohms Not recommended 1
- 4 ohms 3000 W
- 8 ohms 2500 W
- 16 ohms 1250 W
Performance:
- THD 20 Hz - 20 kHz at 1 W <0.1%
- THD at 1 kHz and 1 dB below clipping <0.05%
- Signal to Noise Ratio >112 dBA
- Channel separation (Crosstalk) at 1 kHz >70 dB
- Frequency response (1 W into 8 ohms) + 0 / -3 dB 6.8 Hz - 34 kHz
- Output impedance @ 100 Hz 32 mOhm
Gain, Sensitivity and Limiters:
- VPL, selectable per ch 101, 83, 70, 56, 47, 38 V
- VPL, when bridged 2 202, 166, 140, 112, 94, 76 V
- Voltage Peak Limiter mode (per ch.) Hard / Soft
- Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
- Default gain 35 dB
- Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons:
- Output connectors (per ch.) Neutrik speakON
- Input connectors (per ch.) 3-pin XLR, electronically balanced
- Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
- NomadLink network On board, 2 x RJ45 connectors IN and OUT
- Intelligent fans (on/off) Yes, depending on presence of output signal
- Power on/off and Remote enable on/off Individual switches on front-panel
- Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface:
- Common NomadLink Network; Power Average Limiter (PAL)4; Power on
- Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power:
- Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
- Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
- Power Average Limiter (PAL) 4 Yes
- Soft-start / Inrush Current Draw Yes / max. 5 A
- Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions: 483x88x396 mm
Weight: 12 kg