Lab.Gruppen FP 7000/SP
The versatile FP 7000 supplies power output (2×3500 W at 2 ohms) well matched to a wide variety of applications. At the core of the FP 7000’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 7000 is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the excellent power density of the FP 7000.
Features
Model: FP 7000
General:
- Number of amplifier channels 2
- Peak total output all channels driven 7000 W
- Peak output voltage per channel 155 V
- Max output current per channel 59 A peak
Max output power (all channels driven):
- 2 ohms 3500 W
- 4 ohms 2800 W
- 8 ohms 1450 W
- 16 ohms 730 W
Max output power bridged:
- 2 ohms Not recommended 1
- 4 ohms 7000 W
- 8 ohms 5600 W
- 16 ohms 2900 W
Performance:
- THD 20 Hz - 20 kHz at 1 W <0.1%
- THD at 1 kHz and 1 dB below clipping <0.05%
- Signal to Noise Ratio >112 dBA
- Channel separation (Crosstalk) at 1 kHz >70 dB
- Frequency response (1 W into 8 ohms) + 0/-3 dB 6.8 Hz - 34 kHz
- Output impedance @ 100 Hz 19 mOhm
Gain, Sensitivity and Limiters:
- VPL, selectable per ch 155, 121, 101, 83, 70, 56, 47, 38 V
- VPL, when bridged 2 310, 242, 202, 166, 140, 112, 94, 76 V
- Voltage Peak Limiter mode (per ch.) Hard/Soft
- Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
- Default gain 35 dB
- Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons:
- Output connectors (per ch.) Neutrik speakON
- Input connectors (per ch.) 3-pin XLR, electronically balanced
- Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
- NomadLink network On board, 2 x RJ45 connectors IN and OUT
- Intelligent fans (on/off) Yes, depending on presence of output signal
- Power on/off and Remote enable on/off Individual switches on front-panel
- Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface:
- Common NomadLink Network; Power Average Limiter (PAL)4; Power on
- Per channel Signal present/High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power:
- Operating voltage, 230 V/115 V nominal 3 130-265 V/65-135 V
- Minimum power-up voltage, 230 V/115 V 171 V/85 V
- Power Average Limiter (PAL) 4 Yes
- Soft-start/Inrush Current Draw Yes/max. 5 A
- Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions: 483x88x396 mm
Weight: 12 kg