Your list
“Comparison list” is empty

(044) 592 78 50

  • Sign in | Register

Power Amplifier Bosch LBB1930/20
Power Amplifier Bosch LBB1930/20
  • About the product
  • Features
  • Accessories
  • Reviews
29 045
Back

Power Amplifier Bosch LBB1930/20

Description

The LBB 1935/20 is a powerful 240 W power amplifier in a 2U high 19” case for rack mounting or tabletop use. LEDs on the front panel show the status of the amplifier: power, audio output level, and supervised functions. This high-performance unit fulfils a wide range of public address requirements at a surprisingly low cost.

Functions:

  • Dependability. The amplifier is protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels. An overheat protection circuit switches off the power stage and activates an LED on the front panel, if the internal temperature reaches a critical limit due to poor ventilation or overload.
  • The unit operates both on mains power and on a 24 V battery power supply for emergency back up, with automatic switchover
  • For emergency and evacuation use, the following functions are monitored: mains presence, battery present, pilot tone presence, amplifier operation. Front panel LEDs indicate the status of supervised functions. The LEDs of pilot‑tone supervision and battery status can be switched off for general public address use. Failsafe (normally energized) relays are provided for each supervised function. These relays are always active regardless of the switches on the rear panel.
  • Input. The amplifier has two balanced inputs with priority control, each with a loop‑through facility. This makes it easy to connect remote systems that require priority control. An additional 100 V line input is provided to connect the amplifier to a 100 V loudspeaker line to provide more power to remote locations.
  • Gain or level control is located on the rear of the unit to avoid accidental setting change. A meter with LED‑bar shows the output level.
  • Output. The amplifier has 70 V and 100 V outputs for constant voltage loudspeaker systems, and a low impedance output for 8 ohm loudspeaker loads.
  • The amplifier has two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not receive announcements made via the priority input.

Controls and indicators

  • Front
    • Meter (LED's for: -20, -6, 0 dB and Power ON)
    • Battery operation indicator
    • Overheat indicator
  • Back
    • Level control input 1
    • Level control input 2
    • Power button
    • Mains switch

Interconnections

  • Back
    • Priority line input 1 (XLR/balanced)
    • Line loop‑through 1 (XLR/balanced)
    • Program line input 2 (XLR/balanced)
    • Line loop‑through 2 (XLR/balanced)
    • Priority controlled loudspeaker output terminals
    • 24 VDC power supply terminal
    • Three loudspeaker direct output terminals
    • Two 100 V slave input terminals
    • Input 2 enable control terminal
    • Input 1 priority control terminal
    • Earth connection screw
    • Mains socket

Specifications:

  • Mains power supply
    • Voltage: 230 VAC, ±10%, 50/60 Hz
    • Inrush current: 9 A
    • Max power consumption: 760 VA
  • Battery power supply
    • Voltage: 24 VDC +15% / -15%
    • Current max: 11 A
  • Performance
    • Output power (rms/maximum): 240 / 360 W
    • Power reduction on backup power: -1 dB
    • Frequency response: 50 Hz to 20 kHz (+1 / ‑3 dB at ‑10 dB ref. rated output)
    • Distortion: <1% at rated output power, 1 kHz
    • S/N (flat at max volume): >90 dB
  • Line inputs:2 x
    • Connector: 3-pin XLR, balanced
    • Sensitivity: 1 V
    • Impedance: 20 kohm
    • CMRR: >25 dB (50 Hz to 20 kHz)
    • Gain: 40 dB
  • 100 V input
    • Connector: Screw, unbalanced
    • Sensitivity: 100 V
    • Impedance: 330 kohm
  • Line loop-through output: 2 x
    • Connector: 3-pin XLR
    • Nominal level: 1 V
    • Impedance: Direct connection to line input
  • Loudspeaker outputs:3 x
    • Connector: Screw, floating
    • Direct output: 100 V, 70 V, 8 ohm
    • Priority only (from input 1): 100 V or 70 V internally selectable
    • Music (non-priority) only: 100 V or 70 V internally selectable
  • Power consumption
    • Mains operation
      • Max power: 451 W
      • -3dB: 340 W
      • -6dB: 244 W
      • Pilot tone*: 55 W
      • Idle: 16 W
    • 24 V operation
      • Max power: 12,1 A (290 W)
      • -3 dB: 11,4 A (274 W)
      • -6 dB: 8,1 A (194 W)
      • Pilot tone*: 1,7 A (41 W)
      • Idle: 0,3 A (7 W)

* 20 kHz -20dB with maximum loudspeaker load

  • Mechanical
    • Dimensions (H x W x D): 100 x 430 x 270 mm (19" wide, 2U high, with feet)
    • Weight: Approx. 12,5 kg
    • Mounting: Standalone, 19”rack
    • Color: Charcoal
  • Environmental
    • Operating temperature: -10 ºC to +55 ºC (14 ºF to +131 ºF)
    • Storage temperature: -40 ºC to +70 ºC (-40 ºF to +158 ºF)
    • Relative humidity: <95%
    • Acoustic noise level of fan: <48 dB SPL at 1 m (max output)
Code: LBB1935/20
29 045
There

Installment

1 452 / months.

In installments
We offer you to purchase the goods
by making our interest-free installment.
That is, You do not overpay for a commodity a dime!
Make it easy: after choosing goods in the store,
You pay the first installment and take out
the purchased item, and within the next 6 months
pay the remaining amount.

The terms of the installment purchase in the online store
Musician.ua:


• the recommended down payment is 60-70%;
• for regular customers with a positive history
of payments, possible contribution from 30%;
• you will pay the balance in equal installments.
Within the next 6 months from
the time of purchase

Узнать условия
The first installment 20331.5
6  payments 1452.3
The sum of all payments 29045
Overpayment 0 ₴
Similar products
Description

The LBB 1935/20 is a powerful 240 W power amplifier in a 2U high 19” case for rack mounting or tabletop use. LEDs on the front panel show the status of the amplifier: power, audio output level, and supervised functions. This high-performance unit fulfils a wide range of public address requirements at a surprisingly low cost.

Functions:

  • Dependability. The amplifier is protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels. An overheat protection circuit switches off the power stage and activates an LED on the front panel, if the internal temperature reaches a critical limit due to poor ventilation or overload.
  • The unit operates both on mains power and on a 24 V battery power supply for emergency back up, with automatic switchover
  • For emergency and evacuation use, the following functions are monitored: mains presence, battery present, pilot tone presence, amplifier operation. Front panel LEDs indicate the status of supervised functions. The LEDs of pilot‑tone supervision and battery status can be switched off for general public address use. Failsafe (normally energized) relays are provided for each supervised function. These relays are always active regardless of the switches on the rear panel.
  • Input. The amplifier has two balanced inputs with priority control, each with a loop‑through facility. This makes it easy to connect remote systems that require priority control. An additional 100 V line input is provided to connect the amplifier to a 100 V loudspeaker line to provide more power to remote locations.
  • Gain or level control is located on the rear of the unit to avoid accidental setting change. A meter with LED‑bar shows the output level.
  • Output. The amplifier has 70 V and 100 V outputs for constant voltage loudspeaker systems, and a low impedance output for 8 ohm loudspeaker loads.
  • The amplifier has two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not receive announcements made via the priority input.

Controls and indicators

  • Front
    • Meter (LED's for: -20, -6, 0 dB and Power ON)
    • Battery operation indicator
    • Overheat indicator
  • Back
    • Level control input 1
    • Level control input 2
    • Power button
    • Mains switch

Interconnections

  • Back
    • Priority line input 1 (XLR/balanced)
    • Line loop‑through 1 (XLR/balanced)
    • Program line input 2 (XLR/balanced)
    • Line loop‑through 2 (XLR/balanced)
    • Priority controlled loudspeaker output terminals
    • 24 VDC power supply terminal
    • Three loudspeaker direct output terminals
    • Two 100 V slave input terminals
    • Input 2 enable control terminal
    • Input 1 priority control terminal
    • Earth connection screw
    • Mains socket

Specifications:

  • Mains power supply
    • Voltage: 230 VAC, ±10%, 50/60 Hz
    • Inrush current: 9 A
    • Max power consumption: 760 VA
  • Battery power supply
    • Voltage: 24 VDC +15% / -15%
    • Current max: 11 A
  • Performance
    • Output power (rms/maximum): 240 / 360 W
    • Power reduction on backup power: -1 dB
    • Frequency response: 50 Hz to 20 kHz (+1 / ‑3 dB at ‑10 dB ref. rated output)
    • Distortion: <1% at rated output power, 1 kHz
    • S/N (flat at max volume): >90 dB
  • Line inputs:2 x
    • Connector: 3-pin XLR, balanced
    • Sensitivity: 1 V
    • Impedance: 20 kohm
    • CMRR: >25 dB (50 Hz to 20 kHz)
    • Gain: 40 dB
  • 100 V input
    • Connector: Screw, unbalanced
    • Sensitivity: 100 V
    • Impedance: 330 kohm
  • Line loop-through output: 2 x
    • Connector: 3-pin XLR
    • Nominal level: 1 V
    • Impedance: Direct connection to line input
  • Loudspeaker outputs:3 x
    • Connector: Screw, floating
    • Direct output: 100 V, 70 V, 8 ohm
    • Priority only (from input 1): 100 V or 70 V internally selectable
    • Music (non-priority) only: 100 V or 70 V internally selectable
  • Power consumption
    • Mains operation
      • Max power: 451 W
      • -3dB: 340 W
      • -6dB: 244 W
      • Pilot tone*: 55 W
      • Idle: 16 W
    • 24 V operation
      • Max power: 12,1 A (290 W)
      • -3 dB: 11,4 A (274 W)
      • -6 dB: 8,1 A (194 W)
      • Pilot tone*: 1,7 A (41 W)
      • Idle: 0,3 A (7 W)

* 20 kHz -20dB with maximum loudspeaker load

  • Mechanical
    • Dimensions (H x W x D): 100 x 430 x 270 mm (19" wide, 2U high, with feet)
    • Weight: Approx. 12,5 kg
    • Mounting: Standalone, 19”rack
    • Color: Charcoal
  • Environmental
    • Operating temperature: -10 ºC to +55 ºC (14 ºF to +131 ºF)
    • Storage temperature: -40 ºC to +70 ºC (-40 ºF to +158 ºF)
    • Relative humidity: <95%
    • Acoustic noise level of fan: <48 dB SPL at 1 m (max output)
Similar products
Accessories
There are no reviews for this product — be the first!
Leave a review
Put the assessment of
Your answer
Your comment will be published after moderation by the administrator
Power Amplifier Bosch LBB1930/20 Power Amplifier Bosch LBB1930/20 - 1 Power Amplifier Bosch LBB1930/20 - 2
Filter
Found 5 
Delete List

Are you sure you want to permanently delete this wish list?

To add itemsto Favorites, You need