The PLE-1P120-EU and PLE-1P240-EU are two high-power plug-and-play cost effective power amplifiers that deliver 120 and 240 Watts to constant voltage or 8 ohm loads. Built with premium quality and protections, they offer basic functionality at a budget price. The amplifiers offer straight 1 V and 100 V line in, and 70 V, 100 V and 8 ohms out. They can extend the power of the PLE- series mixer amplifiers or be combined with the PLE-10M2-EU mixer, or work anywhere where more power on an existing 100 V line is needed or when a line level signal is provided.
Functions:
- Protection. The amplifier is protected against overload and short circuits. A limiter protects the amplifier and loudspeaker against accidental overdriving. A temperature-controlled fan ensures proper cooling without producing acoustic noise at lower output levels.
- Power input and output. The unit operates both on mains power and on a 24 V battery power supply for emergency back up, with automatic switchover. The amplifier also has a built‑in charger to charge the connected battery. The system has a balanced input and loop‑through facility. This makes it easy to connect multiple amplifiers. The secondary input is a 100 V line input to connect the amplifier to a 100 V loudspeaker line to provide more power in remote locations. Gain or level control is located on the rear of the unit to avoid accidental setting change. A meter with LED bar shows the output level. The amplifier has a 70 V or 100 V output for constant voltage loudspeaker systems, and a low impedance output for 8 ohm loudspeaker loads.
- Controls and indicators. Front: Power on LED; LED VU meter for master output (LEDs for -18, -12 -6, -3, 0 dB); On/off button. Back: Level control.
Specifications:
- Electrical
- Mains power supply
- Voltage: 115 - 230 VAC ±10%, 50/60 Hz
- Inrush Current: 9/18 A (230/115 VAC)
- Power consumption: 760 VA
- Battery power supply
- Voltage: 24 VDC, +10% / -15%
- Current: 11 A
- Charge current: 0,5 ADC
- Charge float voltage: 27,3 VDC
- Power consumption
- Max power (mains): 451 W
- -6dB (mains): 244 W
- Idle (mains): 16 W
- Max power (24 V): 12 A (290 W)
- -6 dB (24 V): 8,1 A (194 W)
- Idle (24 V): 0,3 A (7 W)
- Performance
- Max / rated power: 360 W / 240 W
- Power reduction on backup power: -1 dB
- Frequency response: 50 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)
- Distortion: < 1% @ rated output power, 1 kHz
- Inputs
- Connector 1: 3-pin XLR, balanced
- Sensitivity: 1 V
- Impedance: 20 kohm
- Connector 2: 3-pin Euro style, balanced
- Sensitivity: 100 V
- Impedance: 300 kohm
- Dynamic range: 100 dB
- CMRR (mic): >40 dB (50 Hz to 20 kHz)
- Loudspeaker outputs 70 V / 100 V
- Connector: Euro style pluggable screw terminals
- Loudspeaker output 8 ohm
- Connector: Euro style pluggable screw terminals 44 V (240 W)
- Mechanical
- Dimensions (H x W x D): 100 x 430 x 270 mm (19" wide, 2U high)
- Mounting: Stand-alone, 19" rack
- Color: Charcoal
- Weight: 12,5 kg
- Environmental
- Operating temperature: -10 ºC to +45 ºC
- Storage temperature: -40 ºC to +70 ºC
- Relative humidity: < 95%
- Acoustic noise level of fan: < 40 dB SPL @ 1 m temperature controlled
- Mains power supply